Mises yield criterion
英
美 [ˈmaɪzɪz jiːld kraɪˈtɪriən]
网络 米泽斯屈服准则
双语例句
- The asymptotic near-tip fields of dynamic steadily propagating Mode-I crack under plane strain condition in elastic-perfectly plastic materials and power-law hardening materials are studied. All the materials are assumed to obey the Von Mises yield criterion and the associated flow rule of plasticity.
本文系统地研究了平面应变条件下理想弹塑性材料和幂硬化材料中稳定扩展的Ⅰ型动态裂纹尖端场的渐近解，其中材料被假设服从Mises屈服准则及其关联的流动法则。 - Circular locus of Mises yield criterion and its application in sheet forming
Mises准则的圆形屈服轨迹及其在板料成形中的应用 - A generalized yield criterion is proposed by means of the plastic deformation mechanism and the theory of plasticity and the reasons for the difference between the Tresca and Mises yield criteria are analyzed with the results given by the generalized yield criterion.
根据金属塑性变形机理及有关弹塑性理论的基本公式，提出了一种广义屈服条件，并用所得结果分析了Tresca条件和Mises条件与实验结果不完全一致的原因。 - General expression of equivalent generalized Mises transformation formula for Mohr-Coulomb yield criterion under plane strain condition
平面应变条件下的M-C准则的等效广义Mises变换公式及其应用 - Formulas were established and programmed to determine plastic zone induced by band-uniformly-distributed-load for homogeneous foundation based on linear relationship between lateral force coefficient and inclination angle, generalized Mises yield criterion and ideal plastoelastic theory.
在假设土的侧压力系数随倾角线性变化的情况下，利用广义Mises条件和理想弹塑性理论导出了均质地基在条形荷载作用下塑性区发展的控制方程组，编制了求解程序。 - Based on the generalized Mises yield criterion, a new combined type of fracture criterion is established which is called the generalized plastic-region size factor fracture criterion.
本文从广义Mises屈服准则出发，建立了一个新的复合型断裂判据&广义塑性区尺寸因子判据。 - In this paper, four yield criteria, i.e. Tresca yield criterion, Mises yield criterion, Mohr-Coulomb yield criterion and Drucker-Prager yield criterion are categorized into shear yield criteria.
将四个屈服准则：Tresca准则、Mises准则、Mohr-Coulomb准则以及Drucker-Prager准则归类为剪切屈服准则。 - Based on Murray ′ s model, the load carrying capacity of the inclined yield line under the axial compression force is formulated by using Von Mises yield criterion.
本文在Murray模型的基础上，采用VONMISES屈服准则，推导了在轴向压力影响下的倾斜塑性铰线承载力公式。 - Based on the generalized Von Mises yield criterion, the singular stress field near a crack tip is adopted. A new criterion is obtained. Its result is coincided with Ref.
在广义的VONMISES屈服准则基础上，结合裂纹尖端附近的奇异应力场，得到了一个新的判据，名叫广义最小塑性区尺寸判据，结果与参考文献[1]一致。 - The paper discusses the scope of application of plane-strain slip line field theories based on the rigid-plastic Prandtl-Reuss equation and proves that the rigid plastic Prandtl-Reuss equation can be derived by Mises yield criterion and associated flow theory.
本文讨论了基于刚塑性的Prandtl-Reuss假设的平面应变滑移线场理论的应用范围，证明了该假设可以由Mises屈服条件和相关联流动法则推导得出。